Kingston 2GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank

Availability:

8 in stock


Kingston 2GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank

£12.23

8 in stock

2GB 1Rx8 256M x 64-Bit PC3-10600 CL9 240-Pin DIMM

DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 256M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. 
 
 
Features
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 667MHz fCK for 1333Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 9, 8, 7, 6
• Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
• Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB Height: 0.740” (18.75mm), single sided component

Description

Specification

  • Series: Kingston ValueRAM
  • DDR Type: DDR3
  • Size: 1 x 2GB
  • #Hide#Individual Module Size: 2GB
  • #Hide#Total Capacity: 2GB Total
  • Speed: 1333 MHz
  • Compliance: PC3-10600
  • Pins: 240-pin
  • CAS Latency: CL9
  • Data Integrity Check: Non-ECC
  • Voltage: 1.5V
  • Heatsink: No
  • #Hide#LED Lighting: No
  • Additional Information: Single rank
    On-Die Termination (ODT)
    Unbuffered
  • Package Type: Blister Pack
  • Package Weight: 0.0205 kg
  • Warranty: Lifetime
EAN: 740617185805 SKU: SP-KVR13N9S6/2 Category: